| 材料材質 | 鐵 |
|---|---|
| 適用范圍 | 鑿巖用 |
| 品牌 | 中翔 |
| 型號 | ZX |
The impactor basic structure in general by the gas distribution mechanism, both inside and outside the cylinder, piston components.
By changing the inlet and exhaust direction, can realize the piston in the cylinder continuously reciprocating movement, thereby also can constantly repeated impact drill bit, this is the most simple impactor principle and process.
Speed depends mainly and the impacter frequency, size and physical mechanical properties of rock drilling. The general speed of 20 revolutions per minute or so to choose good, speed is too high will cause bit severely wear and drilling efficiency is reduced, because of DTH hammer in Qigong is impacting breaking rock, rotary speed to change bit alloy shock rock breaking position, to avoid duplication of broken, therefore, reasonable speed should be guaranteed in the best impact spacing range.
The United States of America well learn Kang burr believed in hard rocks two impact between optimal angle is 11 DEG, which advocates the drill spindle speed in the range of 18 ~ 30R / min. There is also the domestic scholars think, the drilling rate selection in 20 ~ 50 rpm it is more reasonable to use low speed, hard rock, soft rock selection for higher speed.
沖擊器的基本結構一般由配氣機構、內外缸、活塞幾部分組成。
通過不斷改變進排氣方向**可實現活塞在氣缸內的不斷往復運動，從而也能不斷反復沖擊鉆頭，這**是沖擊器工作的**原理和過程。
轉速的高低主要和沖擊器的沖擊頻率，規格大小以及鉆巖的物理機械性質有關。一般轉速選用每分鐘20轉左右為好，轉速過高會造成鉆頭的嚴懲磨損和鉆進效率的降低，由于氣功潛孔錘進是以沖擊碎巖的，回轉速度為改變鉆頭合金的沖擊破巖位置，避免重復破碎，因此，合理的轉速應保證在**優的沖擊間隔范圍之內。
美國水井學會康伯爾認為在硬巖中兩次沖擊之間的**優轉角為11°，因而主張鉆機立軸轉速在18～30r/min。也有國內學者認為，鉆速選擇在20～50轉/分是比較合理的，對于硬巖層選用低轉速，對于軟巖層選用較高轉速。
本公司位于中國**活力的工業生產基地—臺州，我公司是主營汽車配件，礦山配件，紡織配件的**制造商，產品銷售覆蓋全國三十多個省市，公司以**，客戶至上”的理念。品種規格齊全，價格實惠，發貨及時、可研發、也可來圖來樣，為了更方便商家。
本公司提供網上采購和網下銷售，可直接聯絡電話13958621087或0576-86101929
The company is located in China 's most dynamic industrial production base - Taizhou, our company is the main auto parts, mining accessories, textile accessories of outstanding manufacturers, product sales covering more than 30 provinces and cities nationwide, the company to" quality first, customer first " philosophy. Varieties complete specifications, affordable, timely delivery, R & D, but also plans to sample, more convenient for business.
The company offers online procurement and sales, can directly contact 13958621087 or 0576-86101929
